Cel-Fi Go G41 Smart Repeater represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models.

Cel-Fi Go G41 Smart Repeater operates on more frequency bands, now supporting Optus 700 MHz and 2300 MHz 4G networks, and can be easily switched between Telstra, Optus and Vodafone-TPG should you change service provider.

Cel-Fi Go G41 Smart Repeater is ideal for large inbuilding cellular coverage applications for Telstra, Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater, and by popular request, the unit now has an RJ45 Ethernet network interface for remote management.

Expanding on GO2’s dual-band functionality, G41 supports carrier aggregation with 40 MHz of relay bandwidth.

Telstra Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.

• For Dongas, Cabins and other applications
•  700L/850/900/1800/2100/2300/2600 MHz (700 band not supported on Vodafone)
• 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
• Carrier Switching using WAVE App between Telstra, Optus or Vodafone
• Up to 3000 m2 coverage area
• Two band simultaneous relay
• Total System Relay Bandwidth – Up to 40 MHz
• Remote Monitoring, Control and Alert Capabilities via WAVE Portal
• Ethernet Port for connection to internet source for live monitoring

Supported Networks – Telstra, Optus , Vodafone

Includes:

• Cel-Fi Go G41 Smart Repeater
• OMNI Outdoor Wall or Pole Mounted Antenna with 5m LMR195 grade low loss cable
• Screw on Terminal Coverage Antenna
• 240V Mains Power Supply

Installation is recommended. If you require installation services, please call us and ask for Telstra Smart Repeater support. Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 9899 5700 and ask for Telstra Smart Repeater support or email [email protected]