Optus Go Smart Repeater Stationary model is based on the Nextivity’s Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Optus for use on the Optus Mobile Network. Optional installation service is available, see CFGS-INST01 or CFGS-INST07.
Optus Go Smart Repeater is a one box coverage solution for Optus 3G 4G networks operating on 900/2100MHz & 4G 1800/2600MHz bands. It is designed to dramatically boost voice quality and increase data speeds for residential and commercial applications.
Optus Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
For building and other applications
Up to 900m² indoor coverage area
Includes external and internal antennas
Locked to Optus Mobile Network
Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks – Optus Amaysim Dodo iiNet etc
Installation is recommended. If you require installation services, please call us and ask for Telstra Smart Repeater support. Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will Comnet Solutions be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 9899 5700 or THFCOMMS 02 6680 7949 and ask for Optus Smart Repeater support or email [email protected]
Includes a High Performance Yagi/Grid Edge Donor Antenna with 10m cable and Coverage Panel Antenna with 6m cable. Edge Antenna is designed for regional applications on the edge of the network.
The Coverage Antenna can be optionally replaced with a selection of high performance Ceiling Coverage Antennas.