Shop

Optus Go Repeater Mobile Trucker RFI Kit 3G / 4G

$1,199.00

 

Get the mobile reception you deserve !

Whether you’re a truck driver tired of cruising through dead zones of data service, or you’re planning your next big motor home or 4WD trip, a 3G/4G mobile repeater is the ultimate tool for truckers and cross-country drivers. part no.   OPTUS-G31-OM-CD5-B

Supported Networks –  Optus, Amaysim, Dodo, iiNet, plus more

Many drivers find that in remote areas, calls on their phones are constantly dropping and internet speeds are at an all-time low. Our 3G/4G mobile repeater work to eliminate these annoyances when travelling by:

 

  1. Pulling in the existing mobile signal through the Outside Antenna
  2. Boosting the signal through the Amplifier
  3. Rebroadcasting the enhanced signal with the Internal Antenna
  4. With just these three steps, your 3G/4G mobile repeater will increase the quality of your mobile services with crystal clear calls and reliable service and reception – dropped calls and slow internet speeds will be a thing of the past!

Supported Networks – Optus, Amaysim, Dodo, iiNet, plus more

Includes:

  • Optus Cel-Fi Go Smart Repeater – 100dBi Mobile model
  • 1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
  • 1x RFI CD8195-B Black Donor Antenna with 5M cable – SMA male –  890mm long
  • 12V cigarette lighter plug adapter

 

SUITABLE FOR:

 

  • Trucks and Buses
  • 4WD
  • Motor Homes
  • Cross-Country Drivers
  • All Vehicles with mount for High Gain antenna

 

Optus Go Smart Repeater Mobile model is based on the Nextivity’s Cel-Fi GO Mobile Phone Repeater and has been tested, authorized and approved by Optus for use on the Optus  Mobile Network.

Optus  Go Smart Repeater is a one box coverage solution for Optus networks operating on Covers 3G/900 & 4G/700/1800 one band at a. It is designed to dramatically boost voice quality and increase data speeds for in vehicle applications.

Optus Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.

 

TECH SPECS.

Available Frequency Bands (MHz) Optus Band 3/8/28
Frequency Range 1800Mhz, 900Mhz and 700Mhz
RF Gain 100dB
RF Connectors SMA
Power Supply + 12V CLA adapter
Ambient Temp. Range 0° to 65°C
Environment IP54
Weight (inc. frame) 600gm
Dimensions 255mm(W) x 87mm(D) x 28mm(H)
Output Impedance 50ohms
Current Consumption 15W
DC Supply 9.6 to 28.8 VDC via external supply
Case One piece extruded Aluminium
Frequency – Layered Navigation Multiband

 

Out of stock

Description

 

For trucks and other vehicle applications
100dBi of system gain
Includes external and internal antennas
Locked to Optus Mobile Network
Carrier approved
Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks –  Optus, Amaysim, Dodo, iiNet, plus more

Includes:

  • Optus Go Smart Repeater Mobile model
  • 1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
  • 1x RFI CD8195-B Black Donor Antenna with 5M cable – SMA male –  890mm long
  • 12V cigarette lighter plug adapter

 

Professional Installation is recommended. If you require installation services, please call us and ask for Optus Smart Repeater support. Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will THFCOMMS  be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. 02 6680 7949  , Should be installed by a licensed auto electrician.

 

Specifications are subject to change without notice. Picture may not be exact model as described.
Before using this product you will need to download mobile app and register before first use .

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Optus Go Repeater Mobile Trucker RFI Kit 3G / 4G”