Shop

Telstra Go Repeater Stationary Building Kit 3G/4G/4GX Ceiling kit

$1,699.00

 

Telstra Go Smart Repeater Stationary model is based on the Nextivity’s Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.    Includes High Quality High Gain Yagi antenna ,(   15dBi Log Periodic Yagi Directional Antenna)   and Indoor High Performance White Ceiling Antenna with 6m LMR195 cable

Telstra Go Smart Repeater is a one box coverage solution for Telstra’s Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for residential and commercial applications.

Telstra Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.

For building and other applications

Up to 900m² indoor coverage area
Includes external and internal antennas
Locked to Telstra’s Mobile Network
Carrier approved
Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks – Telstra, Aldi Mobile, Boost Mobile,

Woolworths Mobile

 

Includes:

Telstra Cel-Fi Go Smart Repeater – 100dBi Stationary model

Log Period Yagi Antenna (LPDA) with 10m 240 grade cable

Indoor High Performance White Ceiling Antenna with 6m LMR195 cable

240V Mains Power Supply

 

Installation is recommended. If you require installation services, please call us and ask for Telstra Smart Repeater support. Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will THFCOMMS  be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 6680 7949 and ask for Telstra Smart Repeater support or email [email protected]

 

Out of stock

Description

 

Telstra Go Smart Repeater Stationary Building 3G/4G/4GX Kit is suitable for building and residential applications and includes a 15dbi Pole Mount Log Periodic Directional Antenna (LPDA) with 10m cable and Coverage Panel Antenna with 6m cable and Indoor High Performance White Ceiling Antenna with 6m LMR195 cable .

High Performance Pulse Larson White Ultra Thin* DAS Ceiling Coverage Antenna with 6m Cable. Optional Above Ceiling Reflector NG7OMNI-ACR increases gain of the ceiling antenna by up to 3dBi.

* For the demanding buyer where high performance and an elegant appearance is required. Ideal for prestige office or home.

 

CEL-FI GO SIGNAL BOOSTER PROTECTS THE MOBILE NETWORK IN SEVERAL WAYS BY:

 

  • Continuously monitors the power levels from the mobile tower it is connected to and constantly adjusts the Cel-Fi’s output power to suit.
  • Only amplifies one carrier’s mobile signal, operating within a set frequency.
  • Does not interfere with the carrier’s network or other users on the network.
  • Having a unique installation process to eliminate feedback into the mobile network.
  • Cel-Fi GO is covered by a 24-month warranty.

 

The Cel-Fi GO repeater is the first carrier class indoor and outdoor mobile coverage solution to feature an industry leading 100dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO booster leverages the award winning Intelligent boost signal processing system to deliver the industry’s largest coverage footprint with the best voice and data performance.
Cel-Fi GO signal booster is IP54 weather rated and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties and government buildings as well as agricultural settings also mining and manufacturing operations, Rural areas, Businesses, and large homes.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Telstra Go Repeater Stationary Building Kit 3G/4G/4GX Ceiling kit”