Telstra Cel-Fi Go Smart Repeater Stationary DAS Building Kit 3G/4G/4GX.
Distributed Antenna System (DAS) model is suitable for building applications and includes a Pole Mount Log Periodic Directional Antenna (LPDA) with 10m cable and two (2) High Performance Pulse Larson White Ultra Thin* DAS Ceiling Coverage Antennas with 10m Cables. Optional Above Ceiling Reflector NG7OMNI-ACR increases gain of the ceiling antenna by up to 3dBi. add @ checkout if needed .
* For the demanding buyer where high performance and an elegant appearance is required. Ideal for prestige office or home.
Telstra Go Smart Repeater Stationary model is based on the Nextivity’s Cel-Fi GO Mobile Phone Repeater and has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network. Optional installation service is available, see CFGS-INST01 or CFGS-INST07.
Telstra Go Smart Repeater is a one box coverage solution for Telstra’s Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800MHz bands. It is designed to dramatically boost voice quality and increase data speeds for residential and commercial applications.
Telstra Go Smart Repeater offers a more flexible installation over other Cel-Fi models due to the abilty to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.
For building and other applications
Up to 900m² indoor coverage area (Two locations restricted by cable lengths. Longer cables are optional.)
Includes external and internal antennas
Locked to Telstra’s Mobile Network
Bluetooth WAVE App for iPhone, Android & Computers
Supported Networks – Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile
f you require installation services, please call us and ask for Telstra Smart Repeater support. Installation should be carried out strictly in accordance with the Cel-Fi GO Mobile Quick Start Guide and Cel-Fi GO Stationary Quick Start Guide and any other information contained in the box. Vehicle installations of the Cel-Fi Go Mobile in particular requires special attention not to interfere with air bag mechanisms, safety and control systems, ABS, stability and traction systems and the vehicles auto electrics in general. You should be familiar with applicable federal and state regulations and industry standards regarding installation. Incorrect installation may result in water leaks, electrical damage, fusing and risk of fire. Misuse of this equipment or failure to follow the instructions in the Quick Start Guide could result in injury and equipment damage. In no event will THFCOMMS be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment. Please contact our Support Team if you have any questions regarding the above precautions. Call (02) 6680 7949 and ask for Telstra Smart Repeater support or email [email protected]
Includes a High Performance Yagi/Grid Edge Donor Antenna with 10m cable and Coverage Panel Antenna with 6m cable. Edge Antenna is designed for regional applications on the edge of the network.
The Coverage Antenna can be optionally replaced with a selection of high performance Ceiling Coverage Antennas.